GM 6000 - Visible Stain Remover

Our product, GM 6000, is the workhorse of The Goldmorr System and is used for the removal of visible mold staining from colorfast surfaces such as: Sheetrock, Plywood, OSB, Concrete, Lumber, Stonework, Roofing and Tile & Grout, to name a few!

 

To get to the hyphae (root) of the mold colony GM 6000 is formulated to penetrate porous materials, yet will not affect most paints. Within moments, your structure can look like new!

​• Proprietary
• Easy to Use
• Superior stain remover
• Safe for hard porous surfaces
• No pre-treatment of surface required
• No special equipment needed
• Minimal or no wire brushing or scrubbing

• Ingredients break down into safe, biodegradable by-products

Mimsco in Anniston, Alabama

Scott Mims - Goldmorr ‘saved the day’.

 

“We were in a large attic that had serious mold contamination deep in the wood sheathing and supports. We were attempting to use a hydrogen peroxide based product and steel brushes to remove the embedded mold. Even applying the H-‐peroxide 3 times and scrubbing with steel brushes wasn’t removing the staining. Our first shipment of Goldmorr product had yet to arrive so we brought in our ice blasting equipment and began to use it. Then the Goldmorr arrived in the mail and we immediately mixed up a bottle of the GM6000 and applied some to the wood previously treated with the peroxide and it instantly removed the mold staining! We then treated the rest of the attic and the results were simply amazing! Great results with so much less labor!”

1/8
GM 6000 Before & After Photos
(see more in our Gallery)

GM 2000 / GM  Thermo - Non Mechanical Air Scrubbers

Rainbow Intl in Shreveport 

Daniel Chambers

 

Our very first Goldmorr project after we completed the training course was a home where condensation based mold contamination was everywhere, on cabinets, walls, window, and the furniture. We were able to treat and clear everything in the entire house! We are very excited about Goldmorr!

Our bio-degradable products, GM 2000/GM Thermo, are water/oil based solutions that are safe to be fogged into the building environment including AC ducting.  An 

essential step in the Goldmorr mold remediation process is the elimination of airborne particulates.  The GM 2000/GM Thermo acts as a non-mechanical air scrubbing system leaving the air quality clean and fresh.

• Proprietary                                 • Low/Non-irritant

• Ready to use solution                   • Non-scented

• Treat large & inaccessible areas    • Non-bleaching
• Extensively tested                        • Bio-degradable
• Proven results

1/3
Close up of mold spores

GM 2000 - Content Micro Cleaning

GM 2000, a water based green cleaning product can also be used for removal of visible debris, including mold.  It can be used for clothing, furniture, carpets, keepsakes, etc.

 

It is applied with a sprayer or microfibre cloth and safely wipes away any mold debris.

Additional benefits are that it is non-scented, so there can be no question of it masking odors. Its non-bleaching feature means that it is safe to use on any surface.

1/6
Soft content cleaning

IAQ - Analytics - Post Remediation Air Quality Testing 

DS Consultants

Denver CO

 

"In the many years that I have been performing clearance testing on mold work, I have never seen a cleaner indoor air environment than when I inspect and test behind a job that is remediated with the Goldmorr System."
 

With the recognition of a "whole house" treatment being part of a complete remediation protocol, showing the quality of your work is a must. 

 

When removing visible mold you can clearly see the difference.  However, post remediation air quality testing is necessary to show that the invisible air borne mold spores have been reduced/eliminated as well. 

 

As part of the complete Goldmorr System, you have treated the whole house, not just the area of visible mold contamination, providing your customer with the best mold remediation available.

Sample each room. It's easy and affordable for you and your client, with reporting results based on internationally established standards.

Randy Gandara

General Manager

360-480-9188

 

 Bret Sallee

National Trainer - Sales Rep

870-405-8703

844-446-5366

info@goldmorrusa.com

The Goldmorr Family

With hundreds of registered Goldmorr Companies across the country, there's likely one near you!